ABB RDNA-01 DeviceNet Adapter Module – ACS800/550 Fieldbus – Tested

Product Overview

Original ABB RDNA-01 DeviceNet adapter module for ACS800, ACS550, and ACH550 series drives. Acts as a Class 2 slave device on the DeviceNet network. Supports explicit messaging, poll-response, and change-of-state/cyclic services. Compatible with ODVA AC/DC Drive Functional Profile and ABB Drives Profile. Enables seamless integration with Rockwell Automation PLCs and other DeviceNet masters.

Key Features

• Genuine ABB original – for ACS800, ACS550, ACH550 series drives
• DeviceNet adapter module – Class 2 slave device
• Protocol: DeviceNet, 125 kbit/s – 500 kbit/s (auto-detect)
• Supports ODVA AC/DC Drive Profile and ABB Drives Profile
• Predefined master-slave connection set services
• Explicit messaging, poll-response, change-of-state/cyclic
• MAC ID and baud rate configurable via DIP switches or parameters
• Up to 64 nodes on DeviceNet network
• Original pulled – no repair history

Specifications

Compatibility Note

• Compatible with ACS800, ACS550, ACH550, and DCS800 series drives
• Installs into drive’s option slot
• MAC ID and baud rate configurable via DIP switches (hardware) or drive parameters (software)
• Requires DeviceNet EDS file for master configuration
• Terminating resistors required at each end of trunk line
• Verify drive model and hardware version before ordering

Quality Assurance

• Original pulled from working drive; tested functional with no repair history
• Actual photos sent before shipping
• Test video available upon request
• ESD anti-static packaging