Danfoss 132B7026 / 132B7020 Main Board – FC 360 – Tested

What Is the Danfoss 132B7026 / 132B7020 Main Board?

The Danfoss 132B7026 / 132B7020 Main Board is listed as a control board for selected Danfoss VLT AutomationDrive FC 360 frequency converter applications.

The control board is an important part of the drive’s control system. It supports communication between the drive’s control functions and its other internal components.

This listing covers boards identified by the part numbers 132B7026 and 132B7020. The exact part number must be checked against the label on the original board before ordering. Please note that 132B7026 should be verified carefully, as some parts listings show the similar number 130B7026.

Key Specifications

Item	Details
Brand	Danfoss
Part Numbers	132B7026 / 132B7020
Product Type	Main Control Board
Drive Series	VLT AutomationDrive FC 360
Listed Power Range	0.37–75 kW
Compatibility	Version and configuration dependent
Condition	Tested
Replacement Reference	Original board part number and drive type code must be checked

Applications and Compatibility

This board is listed for selected Danfoss VLT AutomationDrive FC 360 frequency converters.

The advertised power range is 0.37–75 kW. However, this range should not be treated as confirmation that one board version fits every FC 360 drive.

Compatibility may depend on:

• The exact original control-board part number
• FC 360 drive model and complete type code
• Hardware and software versions
• Drive power rating and enclosure configuration
• Connector layout and board revision

Please compare the original board label and drive identification details before purchasing.

How to Identify the Correct Replacement Main Board

To reduce the risk of ordering an incompatible board, check the following information:

• Read the part number printed on the original control board.
• Confirm whether the original number is 132B7020, 130B7026, or another number.
• Record the complete FC 360 drive type code from the drive nameplate.
• Check the drive power rating and hardware version.
• Compare the board layout, connectors, and revision markings.

Do not select a replacement based only on the FC 360 series name or power rating.

When Should the Main Board Be Replaced?

A main control board may require inspection or replacement when the drive shows control-related faults, communication problems, abnormal operation, or visible damage to the board.

Before replacing the board, check the drive’s fault history, wiring, power supply, and other related components. A fault code alone does not confirm that the main board is defective.

Condition and Testing

This Danfoss main control board is supplied in tested condition.

The board is inspected and tested before dispatch. Please contact us if you need details about the available test scope or condition of the specific unit.

The tested condition does not guarantee compatibility with every FC 360 drive configuration. Confirm the original part number and drive version before ordering.

Frequently Asked Questions

Q1: Is this board compatible with all Danfoss FC 360 drives?

No. Compatibility depends on the exact board number, drive type code, hardware revision, and configuration.

Q2: Does this board cover the full 0.37–75 kW range?

The 0.37–75 kW range is the advertised application range for this listing. It does not confirm universal compatibility across all power ratings.

Q3: Are 132B7026 and 132B7020 interchangeable?

Do not assume they are interchangeable. Compare the original board number and revision before ordering. Also verify whether the intended number is 130B7026 rather than 132B7026.

Q4: Can I replace the board using only the FC 360 model name?

No. The complete drive type code and original board number are needed for a more reliable compatibility check.

Q5: Is the board tested before shipping?

Yes. This listing is for a tested board. Contact us for details about the test scope of the available unit.

Q6: What information should I provide before ordering?

Please provide a clear photo of the original board label, the drive nameplate, the complete part number, and the drive power rating.

Q7: Will replacing the main board require parameter setup?

Depending on the drive configuration and replacement board, parameter checking or configuration work may be required. Follow the applicable Danfoss service instructions.

Need Help Confirming Compatibility?

Not sure whether Danfoss 132B7026 or 132B7020 is the correct replacement for your FC 360 drive?

Send us:

• A photo of the original control board
• The board part number and revision
• A photo of the drive nameplate
• The complete drive type code and power rating

We can help check the available information before you place your order.