Danfoss 132B7128 Main Board – FC111 30-90KW – Model & Version Required – Tested

What Is the Danfoss 132B7128?

The Danfoss 132B7128 is an industrial electronic main control board listed for selected Danfoss VLT Flow Drive FC 111 frequency converter applications.

This board is intended for industrial drive maintenance, troubleshooting and replacement requirements where the original main board needs inspection or replacement.

The product is offered as tested stock for industrial VFD repair and spare parts applications.

The listed application range is FC 111 drives rated 30–90 kW. However, compatibility depends on the exact drive model, hardware revision and board configuration.

Before ordering, verify the original part number, complete drive type code and board version to ensure the correct replacement.

Key Specifications

Specification	Details
Part Number	132B7128
Brand	Danfoss
Product Type	Main Control Board
Drive Series	VLT Flow Drive FC 111
Listed Power Range	30–90 kW
Drive Power Configuration	Model Dependent
Hardware Version	To be confirmed
Board Revision	To be confirmed
Voltage Configuration	To be confirmed
Control Board Configuration	To be verified
Condition	Tested Stock
Testing Status	Tested
Application	Industrial VFD Maintenance and Repair
Compatibility	Exact Model and Version Required

Applications and Compatibility

The Danfoss 132B7128 Main Control Board is listed for selected FC 111 variable frequency drive applications.

Potential maintenance and replacement applications include:

• Danfoss FC 111 drive maintenance.
• Replacement of an existing main control board.
• Industrial frequency converter repair.
• Troubleshooting of drive control-related faults.
• Industrial automation equipment servicing.
• Maintenance of compatible 30–90 kW drive configurations.

Important Compatibility Checks:

Before ordering, verify:

• Confirm that the original board carries the exact part number 132B7128.
• Check the complete Danfoss FC 111 drive model and type code.
• Verify the drive power rating.
• Confirm the input voltage and enclosure configuration.
• Compare the original board revision and identification markings.
• Check connector positions and pin configuration.
• Verify the replacement board version against the original equipment documentation.

The 30–90 kW range is a listed application range, not confirmation that one board version fits every drive in this power range.

Do not assume that all FC 111 drives rated 30–90 kW use the same main control board.

Compatibility with FC 101 or other Danfoss drive series has not been confirmed.

How to Identify the Correct Replacement Board

When replacing a main control board, carefully compare the original board with the replacement unit.

Check the following details:

• Part number printed on the original PCB.
• Board identification code and hardware revision.
• Complete FC 111 drive type code.
• Drive power rating and input voltage.
• Connector positions and pin arrangement.
• Physical board layout and mounting points.
• Original equipment spare parts reference.

If you are unsure about compatibility, send us clear photos of the existing board and drive nameplate before ordering.

When Should the Main Control Board Be Replaced?

A main control board may require inspection when a frequency converter experiences control-related faults, abnormal operation or failure to respond correctly.

Before replacing the board:

• Inspect the PCB for visible damage or burnt components.
• Check connectors and wiring connections.
• Inspect the relevant control circuits.
• Review the drive fault history and diagnostic results.
• Check the power supply to the control electronics.
• Verify that the replacement part number and hardware version match the original board.

Drive faults do not automatically indicate a defective main control board. Other electronic components, wiring and connected equipment should also be inspected by qualified personnel.

Condition and Testing

This Danfoss 132B7128 Main Control Board is offered as tested stock for industrial VFD maintenance and replacement.

• Product identification: Danfoss 132B7128.
• Product type: Main Control Board.
• Listed drive series: FC 111.
• Listed power range: 30–90 kW.
• Compatibility: Model and hardware version dependent.
• Testing status: Tested.
• Physical condition: Please refer to actual product photographs.
• Functional testing details: To be confirmed.

Please contact us for available inspection details, actual product photos and current stock availability.

Confirm the exact board version, physical condition and testing scope before purchase.

Frequently Asked Questions

What is the Danfoss 132B7128 used for?

The 132B7128 is listed as a main control board for selected Danfoss FC 111 industrial frequency converter applications.

Is the 132B7128 compatible with all FC 111 drives from 30–90 kW?

Not necessarily. The listed power range does not guarantee universal compatibility. The complete drive model, hardware revision and original board number must be checked.

Can I use the 132B7128 for a 30 kW or 90 kW FC 111 drive?

The product listing indicates a 30–90 kW application range. However, the correct board version must be verified against the specific drive configuration before ordering.

Is the 132B7128 compatible with FC 101 drives?

FC 101 compatibility has not been confirmed. Please provide the original board number and complete drive nameplate for verification.

Is the Danfoss 132B7128 tested?

Yes, this product is listed as tested stock. Please contact us for available inspection and functional testing details.

Is this a new or used main control board?

Please confirm the actual stock condition with our sales team before ordering.

What information is needed to confirm compatibility?

Please provide the original board part number, complete FC 111 drive type code, power rating and clear photographs of the existing board.

Can you supply this board for international industrial maintenance projects?

Please contact us to confirm stock availability, shipping costs and delivery arrangements for your destination.

Need Help Confirming Compatibility?

Looking for a replacement Danfoss 132B7128 Main Control Board?

Send us:

• A clear photo of the existing main control board.
• A close-up photo of the 132B7128 identification label.
• The complete Danfoss FC 111 drive nameplate.
• The drive power rating and voltage information.
• The board hardware revision, if available.
• Your required quantity.

Contact us for product identification, compatibility assistance and quotation.