Schneider QGH43407_00 Trigger Board – ATV600/900 Power-Stage

产品编号: QGH43407_00 Trigger/Main Board
Add to Inquiry

Description


What Is the QGH43407_00?

The Schneider QGH43407_00 is a trigger / main board used across the ATV610, ATV660, ATV950, ATV960, and ATV980 drive platforms. It functions at the power-stage trigger layer — generating and routing the firing signals required by the inverter, and integrating related main-board functions depending on the frame. Supplied as New Original stock.

Key Specifications

Specification Value
Part Number QGH43407_00
Product Type Trigger / Main Board (power-stage)
Compatible Platforms ATV610 / ATV660 / ATV950 / ATV960 / ATV980
Function Gate signal generation and power-stage firing
Condition New Original
Version Note _00 suffix — verify original label

Schneider QGH43407_00 trigger main board for ATV610 ATV660 ATV950 ATV960 ATV980 drives

When This Board Is the Suspect

  • SCF (Short Circuit Fault) with motor cables disconnected — if the short-circuit fault remains after removing the motor leads, the issue is internal to the drive. An abnormal gate-drive signal from the trigger board is a documented contributor to SCF. 
  • InF (Internal Fault) after control-to-power ribbon reseating — Schneider’s InF guidance for ATV600/900 platforms repeatedly points to ribbon connection between the control block and the power stage, as well as power-board feedback signal abnormality.
  • No output / asymmetric phase behavior with IGBTs confirmed good — if the power modules test normal but the drive does not switch correctly, the gate-signal path on this board is the next suspect.

Compatibility Check

Before ordering, confirm:

  • Drive MLFB — the exact ATV610/660/950/960/980 catalogue number on the nameplate. This board spans multiple platforms, but fitment and trigger topology can vary by frame size and power rating.
  • Original board marking — confirm the existing board reads QGH43407_00. Do not substitute a different suffix without verifying the drive MLFB and the original label.
  • Fault context — confirm SCF or InF persists after motor disconnection and ribbon reseating. If the fault clears, this board is likely not the root cause.
  • If unsure, send a photo of the original board label and the drive nameplate before purchase.

QGH43407_00 trigger board gate signal output and connector detail

FAQ

Is QGH43407_00 the main CPU control block?

No. It is the trigger / main board at the power-stage layer. The CPU control block for ATV600 is VX4B600100; for ATV900 it is VX4B900100. This board operates between the control block and the IGBT modules.

Does SCF always mean this trigger board is faulty?

No. SCF indicates a short-circuit condition. Motor cable insulation and IGBT module failure are common causes. A faulty trigger board is one possible source, but the motor and power modules should be ruled out first.

What does the “_00” suffix mean?

It is part of the part number QGH43407_00. Different suffixes may correspond to different hardware revisions. Verify the suffix on the original label before ordering.

Contact sales

E-mail: 1225353621a@gmail.com
Mobile:+86 15903995069
Whatsapp:+86 15903995069
WeChat:+8615903995069

Our products

We are an international supplier of industrial automation spare parts, providing tens of thousands of industrial automation products for users.

Even if the product you are looking for is not on our website, we may have the spare parts you are looking for.

Please contact us and we will serve you as soon as possible.

Send your message to us


Successfully added!