Danfoss 132B7132 Main Board with Network Card – FC280 Series – Tested

What Is the Danfoss 132B7132?

The Danfoss 132B7132 is an industrial electronic main board listed with a network card for selected Danfoss FC 280 series variable frequency drive applications.

It is intended for industrial drive maintenance, troubleshooting and replacement requirements where the original main board needs inspection or replacement.

This product is offered as tested stock for industrial VFD repair and spare parts applications.

Before ordering, verify the original part number, board revision, network card configuration and drive identification details to ensure the correct replacement.

Key Specifications

Specification	Details
Part Number	132B7132
Brand	Danfoss
Product Type	Main Control Board
Configuration	Main Board with Network Card
Drive Series	FC 280 Series (to be verified)
Application	Industrial VFD Maintenance and Repair
Network Card	Included as described in product listing
Condition	Used / Tested Stock (confirm actual condition)
Testing Status	Tested
Hardware Revision	To be confirmed
Network Protocol	To be confirmed
Drive Power Rating	To be confirmed
Compatibility	To be verified against original board

Applications and Compatibility

The Danfoss 132B7132 Main Control Board is listed for FC 280 series industrial variable frequency drive applications.

Potential maintenance and replacement applications include:

• Industrial variable frequency drive repair.
• Replacement of an existing main control board.
• Industrial automation equipment maintenance.
• Drive control system troubleshooting.
• Replacement of damaged or faulty electronic boards.

Important Compatibility Checks:

Before ordering, verify:

• Confirm that the original board carries the exact part number 132B7132.
• Check the complete Danfoss FC 280 drive model and type code.
• Compare the original board revision and identification markings.
• Verify the network card configuration.
• Check connector positions and pin configuration.
• Confirm the hardware configuration against the original equipment documentation.

Do not assume that every FC 280 drive uses the same main board configuration.

Compatibility with other Danfoss drive series has not been confirmed.

How to Identify the Correct Replacement Board

When replacing a main control board, carefully compare the original board with the replacement unit.

Check the following details:

• Part number printed on the original PCB.
• Board identification code and hardware revision.
• Network card identification and configuration.
• Connector positions and pin arrangement.
• Physical board layout and mounting points.
• Complete drive model and nameplate information.

If you are unsure about compatibility, send us clear photos of the existing board and drive nameplate before ordering.

When Should the Main Control Board Be Replaced?

A main control board may require inspection when a variable frequency drive experiences control-related faults or abnormal operating conditions.

Before replacing the board:

• Inspect the board for visible damage or burnt components.
• Check connectors and wiring connections.
• Inspect the network card and related interfaces.
• Review the drive fault history and diagnostic results.
• Check the relevant control circuits.
• Verify the replacement part number against the original board.

Drive faults do not automatically indicate a defective main control board. Other electronic components, wiring and connected equipment should also be inspected by qualified personnel.

Condition and Testing

This Danfoss 132B7132 Main Control Board is offered as tested stock for industrial VFD maintenance and replacement.

• Product identification: Danfoss 132B7132.
• Configuration: Main board with network card, according to the product listing.
• Testing status: Tested.
• Physical condition: Please refer to actual product photographs.
• Functional testing details: To be confirmed.

Please contact us for available inspection details, actual product photos and current stock availability.

Confirm the physical condition and testing scope before purchase.

Frequently Asked Questions

What is the Danfoss 132B7132 used for?

The 132B7132 is listed as a main control board with network card for selected Danfoss FC 280 series drive applications.

Is the 132B7132 compatible with Danfoss FC 280 drives?

The product is listed for the FC 280 series. However, exact compatibility should be verified using the complete drive model, original board number and hardware revision.

Does this product include a network card?

Yes, the product listing describes it as a main board with a network card. Please confirm the actual supplied configuration before ordering.

Is the Danfoss 132B7132 tested?

Yes, this product is listed as tested stock. Please contact us for available inspection and functional testing details.

Is this a new or used main control board?

Please confirm the actual stock condition with our sales team before ordering.

How can I confirm compatibility before purchase?

Send us the original board number, clear photos of the board and the complete drive nameplate. We can help check the available identification information.

Can you ship this industrial spare part internationally?

Please contact us to confirm stock availability, shipping costs and delivery arrangements for your destination.

Need Help Confirming Compatibility?

Looking for a replacement Danfoss 132B7132 Main Control Board with Network Card?

Send us:

• A clear photo of the existing main board.
• A close-up photo of the 132B7132 identification label.
• The complete Danfoss FC 280 drive nameplate.
• The board revision and network card details, if available.
• Your required quantity.

Contact us for product identification, compatibility assistance and quotation.